Support

Replacement operating instructions can be downloaded from the below website https://service.blackanddecker.co.uk/BD/GB/en-GB Copies of instruction manuals are not supplied in hard copy as they ar...

    Please view this short video showing how to remove and clean the beater bar on the BLACK+DECKER Multipower 2 in 1 Cordless Vaccum: The end pieces are also removable allowing you to clear the b...

First make sure you disconnect the saw from the power source by either unplugging the unit from the mains or removing the battery. Details on how to then change the blade can be found in the operat...

Releasing the dust bowl (Fig. O, P) Note: The dust bowl can be released either from the unit whileit is in chassis mode, as shown in figure O, or when beingused in the lift away canister vac mode, ...

In order to purchase a spare part you will need to know the actual part number reference.Please follow the below instructions on how to view the exploded diagram to obtain the spare part reference ...

Open the door of the larger tank and just a simple tap of the tank over the bin will allow you to empty the ORA without getting covered in dust.  The tank can also be rinsed out with tap water.

• Remove the flexi vac from the upright and remove the bowl by pushing the button downwards to release and slide outwards from the flexi vac.• Then turn upside down and release the clip to open the...

Please see below video on how to close the Back Pack Blower Bag using the ROLL+CLICK™.Simply roll the bag 3 times and click push the clasp together. 

• Ensure that the vac is switched off.• Remove the transparent panel on the side of the appliance by lifting the two latches either side• Lift the black circular filter out of compartment • Wash th...

On the side of the main unit lift off the filter access panel exposing the filter chamber, the exhaust filter can now be removed for cleaning.