You can do this on hanging clothes, curtains and furnishing fabrics
Check that there’s adequate ventilation behind the fabric otherwise moisture may build up causing mildew.
Check that there’s nothing behind the fabric that may be damaged by the steam.
Check that pockets, turn-ups, and cuffs are empty.
Check that there’s water in the reservoir.
1. Set the temperature control (4) to max, set the steam control (1) to the no steam position S.
2. Hold the iron close to (but not touching) the fabric.
3. Press the steam burst button (2).
4. Leave four seconds between presses to let the temperature build up.