Always unplug the mower or remove any safety key before attempting to remove a lawn mower blade. If available, please refer to your lawnmower instruction manual for detailed instructions. Note - It is critical for the safe and proper operation of the mower that all blade hardware is re-assembled in the correct order and orientation. Please make note when removing the blade how hardware was originally installed. To remove the blade from the mower, wedge a piece of wood between the deck and the blade to keep the blade from moving. Then, use a ¾?(0.75mm) wrench or socket to loosen the blade nut by turning it counterclockwise. Please note that the blade?s edges are very sharp, so do not touch the blade with bare hands. Please wear heavy duty gloves or wrap the blade with a rag for safe handling.
Articles in this section
- How far does the "T" shanked blade go into the jig saw?
- How do I register my new BLACK+DECKER product?
- How do I register my new BLACK+DECKER product?
- How do I register my new Black & Decker product and where do I send the warranty card?
- How can I remove the chuck from my drill?
- Why is the battery bar flashing white on my Black + Decker Multipower 2 in 1 Cordless Vacuum?
- Why is the battery bar flashing white on my Black + Decker Multipower 2 in 1 Cordless Vacuum?
- When do I replace the dust bowl filter on my Black + Decker Multipower 2 in 1 Cordless Vacuum?
- How long do I need to charge my VersaPak® batteries?
- Where can I buy spare parts for my product?
Comments
0 comments
Please sign in to leave a comment.